19 psi 70 GPM 115V Electric Submersible Pump
$599.99
- Honda
- WSP53AA
- Top discharge
- 70 gal./min. capacity
- Automatic non-mercury float switch
- Double mechanical seal construction
- Rated for continuous use
- 1/2 hp, 115V submersible pump
115 Volt operation allows the pump to be plugged into a standard outlet. (GFCI is recommended). - Rated for continuous use
Operates on continuous duty in temperatures of up to 104°, and intermittent duty up to 140°. Since this pump can be used 7 days a week, 24 hours a day, it is suitable for any application that needs to move water from one place to another on a continuous basis. - Solids handling up to 3/8"
Move slurry and dirty liquids without the worry of damaging the pump. - Lightweight durable stainless steel casing
The pump won’t rust or corrode, minimizing costly repairs and replacement. The 304 stainless steel is an industrial grade, again minimizing damage and reducing the need for repairs. - Automatic non-mercury float switch
Honda submersible pumps use a mechanical float switch instead of mercury, eliminating the use of hazardous materials in the pump. - 70 gal./min. capacity
- Built in thermal reset switch
If the pump overheats, it automatically resets itself after the pump cools down. This is designed to protect the motor from periodic overheating. - 50 ft heavy duty cord
SOW/ASO U.L. listed cord - Top discharge
Great for applications where space is tight. - Operates fully or partially submerged
No need to worry about the water level for the pump! - Shielded ball bearings for added durability
Shielded ball bearings, both top and bottom, add significantly to the longevity of the pump. - Oil lubricated double mechanical seals
Oil lubricated double mechanical seals prevents damage to the seal if the pump is run dry. - Efficient air-insulated motor
- Pump Type
Submersible Standard - Starting Type
Automatic - Casing
Stainless Steel - Motor (HP)
1/2 - Voltage
115 - Starting amps
36 - Running amps
9 - Duty
Continuous - Motor insulation
Class F - Overhead protection
Built-In Thermal Automatic Reset - Discharge Type
Top - Discharge capacity
70 gpm - Max. head (feet)
44
- Port diameter (inches)
1.5 FNPT - Maximum pressure
19 psi - Solids handling
0.375" - Impeller
Stainless Steel - Seals
Tandem Mechanical Carbon/Ceramic-upper SIC/SIC-lower - Cord length (feet)
50 - Cord type
Heavy-Duty 115V - Dimensions (WxH)
8.3" x 17.2" - Pump diameter
8.3" - Dry weight
27 lbs. - Residential Warranty
1 year - Commercial Warranty
1 year
Customer Questions
Write Your Own Review
Sign up & save!
Online orders only. One discount per customer. Must be logged in to receive discount.
More from Honda